Use STP to create p2p channels

In networks where switches with limited memory resources are used, simple reception can be used.
 3r330. It is based on building p2p communication channels between L3 routers using STP (more precisely RSTP) and disabling MAC address memory on intermediate switches.
 3r330. To reserve communication channels between routers, you can use the appropriate dynamic routing protocols.
 3r330.
 3r330.
 3r330. 1. On routers on two parallel logical links, the appropriate dynamic routing protocols are configured (do not forget to specify the type of link p2p, if necessary;)).
 3r330.
 3r330. 2. On the switches for each of the two parallel p2p-channels (VLAN) is built a netless STP tree. The topology of each VLAN should be built in such a way that in case of failure of any of the network components between the two end routers, the second p2p channel continues to work.
 3r330.
 3r330. 3. On all intermediate switches involved in organizing parallel logical links (using VLAN), you can disable MAC address memorization. This allows you to significantly simplify the requirements for the parameters of intermediate switches when the traffic of a large number of devices with unique MAC addresses passes through them.
3r330. 3r330. 3r330.
3r330.
+ 0 -

Comments 3

Offline
maryrosie
maryrosie 25 January 2019 11:31
Very good, I think I found the knowledge I needed. I will see and refer some information in your post. thank your post! kiss novel
Offline
fuzail faisal
fuzail faisal 6 March 2019 10:51
I’m going  to read this. I’ll be sure to come back. thanks for sharing. and also This  article gives the light in which we can observe the reality. this is very  nice one and gives indepth information. thanks for this nice article... used  test equipment
Offline
fuzailfaisal
fuzailfaisal 16 March 2019 08:52
I’m going to read  this. I’ll be sure to come back. thanks for sharing. and also This article  gives the light in which we can observe the reality. this is very nice one  and gives indepth information. thanks for this nice article... http://www.plein-cuir.com/mens-health-how-to-save/

Add comment